Banner
Large burr machine

Large burr machine

Product Details


This machine is an automated machine specially designed for processing the burrs of thermosetting plastics, bakelite, resin and other products such as compression and injection molding.

1. The dust collector is hidden in the body. The input port, the operation panel is arranged in the best way, the operation is easy and the maintenance is simple

2. The projection material is ejected from the high-speed rotating impeller and the burrs in the concave part of the surface hole of the product can be cleaned up in a short time and exert its high efficiency cleaning ability.

3. After the products are processed, all are beautiful and shiny, because the machine is equipped with a special automatic humidification and automatic blowing static device for dust removal

4. The machine can be used continuously for a long time without replacing parts, so the maintenance cost is very small, and it can be processed in large quantities. Each machine can be used for the production capacity of 10-15 people, which is a tool to reduce costs and labor.

The machine is used to process the burrs of compressed or injection molded thermosetting plastic products. Self-contained projection device, chassis, endless belt conveyor, dust collection device, etc. are combined into one. It is a kind of spray washing machine with simple appearance, no space, and high efficiency. The projection material is projected on the product by the high-speed rotating impeller, and the flaky burrs and the burrs in the recesses or holes can be removed in a short time. The amount of projected power can be adjusted by the inverter keyboard on the control panel to an appropriate number of revolutions. The spray washing room is composed of an endless belt conveyor, and rubber is laid all in the room. The input product is stirred in the forward rotation of the belt, and it is hit by the projection material thrown out at high speed to achieve a uniform effect of removing burrs. The projected material can be used continuously through a sophisticated circulation system. Powdery burrs And the smaller projection materials are attracted and collected by the dust collector, while the larger pieces of burrs are filtered out by the screen. In the middle of the suction pipe, there is a nozzle for humidification. A proper amount of moisture can further enhance the spray washing effect, prevent dust adhesion, and increase the life of the projected material.

It is suitable for quick sandblasting of small and medium batches, small and medium-sized general workpieces and high-hardness workpieces, such as injection molding thermo-hard bakelite plastic products and burrs such as ABS, DAP, LCP, PPS, etc. Such as: cleaning of castings, heat-treated parts, burrs, residues, plastic connectors, can be polished on the surface, pre-treatment before electroplating, especially suitable for bakelite, skeleton injection molding rubber parts and rough edges, burrs, and rust layers of metal products , Oxide skin, etc. Yes, the speed and time can be set as required. The utility model relates to the technical field of processing equipment, especially the automatic burr processing machine. It includes a shell, and the inside of the shell is sequentially provided with a jet fan, an endless belt conveyor, a screen, a silo, and a silo from top to bottom. Equipped with a suction port, the ejector fan is connected with the suction port through a sand suction tube. During sand blasting, the centrifugal force of the ejector fan impeller makes a projecting motion and hits the workpiece. The amount of sand thrown is large, the sand blasting is evenly distributed, and the effect of deburring is good. There is also a dust removal device inside the shell. The dust removal device includes a dust suction port, a sand and dust separation chamber, a filter screen, and a dust removal cloth bag. The sand particles are blocked by the filter screen and fall through the pipe into the sand suction pipe, and the dust passes through the filter directly The net enters the dust bag to collect the dust, and the dust removal effect is good; in addition, there is an atomizer on the sand suction tube, which can eliminate static electricity, so that the dust will not be attracted to the surface of the workpiece due to static electricity, so that the treated The product has a clean and bright effect

Product introduction of BT-1000SR ring belt burr machine and plastic burr processing machine

1. Summary

The burr machine is suitable for the burr of compressed or injection molded thermosetting plastic products. The self-contained projection device, chassis, endless belt conveyor, dust collection device, etc. are combined into a whole, which is a kind of burr processing machine with simple appearance, small space, and high efficiency. The projection material is projected on the product by the high-speed rotating impeller, and the flaky burrs and the burrs in the recesses or holes can be removed in a short time. The amount of projected power can be adjusted by the inverter keyboard on the control panel to an appropriate number of revolutions. The spray washing room is composed of an endless belt conveyor, and rubber is laid all in the room.

The thrown-in products are stirred in the forward rotation of the endless belt, and hit by the projected material thrown out at high speed to achieve the effect of uniformly removing burrs. The projected projection material can be used continuously through a sophisticated circulation system. The powdery burrs and smaller projection materials are attracted and collected by the dust collector, while the larger burrs are filtered out by the screen. There is an anti-static liquid spray device in the middle of the suction pipe. A proper amount of moisture can enhance the spray cleaning effect, balance the temperature in the chamber, prevent dust adhesion, and increase the life of the projected material.

2. Machine characteristics

1. The projection sand material is projected on the plastic product by the high-speed rotating impeller, aiming at removing the burrs in the holes, flakes and bumps. The size of the projected power can be adjusted to the appropriate number of revolutions on the inverter keyboard on the control panel.

2. The machine is equipped with a vibrating screen and an exquisite circulation system. The sand material can be used continuously. The powdery burrs and extremely small projection sand materials are attracted and collected by the dust collector, while the larger burrs are filtered by the screen. come out.

3. The plastic burr processor is equipped with an anti-static liquid motor and nozzle in the sand recycling system. The proper humidity can enhance the spray washing effect and reduce the burr and dust adhesion. And can increase the life of the projected sand material.

4. The spray washing room is composed of an endless belt conveyor, and rubber is laid all in the room. The input product is stirred in the forward rotation of the endless belt while the impact surface of the sand material thrown by the impeller achieves the effect of removing burrs.

5. This machine is a combination of self-contained projection device, chassis, endless belt conveyor device, dust collector device and so on. It is a kind of sandblasting machine with simple appearance, no space, high efficiency and can reduce dust pollution.

6. The machine can be used continuously for a long time without replacing parts, so the maintenance cost is low, and it can be processed in large quantities, which is a sharp tool to reduce costs and reduce labor.

Inquiry