arrow_top
Banner
Crawler shot blasting machine

Crawler shot blasting machine

Product Details


Working principle of belt shot blasting machine:

Put the workpiece into the rubber crawler drum, the operator presses the "Run" button, the shot blasting chamber door is closed pneumatically, the shot blasting cleaning starts, the crawler moves forward, the workpiece continuously rolls, and the high-efficiency and powerful shot blasting device will shot blasting at high speed It is projected onto the surface of the tumbling workpiece, and the workpiece can be cleaned completely and evenly. The steel shot flows into the screw conveyor through the chute on the crawler, and then the steel shot is transported to the bucket elevator, and then lifted to the separator by the bucket elevator, where it is separated and stored for later use. After the shot blasting is finished, the shot blasting chamber door opens automatically, the crawler is reversed, and the workpiece is unloaded.

Features:

This machine is mainly composed of shot blasting device, shot blasting chamber, shot lifting and separating mechanism, dust removal mechanism, feeding mechanism, electrical control system, etc. Shot blasting chamber, blade and inner wall are made of high chromium wear-resistant cast iron, long service life

Main structure and working principle

Q324 crawler shot blasting machine is a kind of micro cleaning equipment, mainly composed of cleaning room, shot blasting assembly, elevator, separator, blasting system, dust removal system, electrical system and other parts.

This machine is suitable for the surface derusting or shot blasting of many kinds of large and medium batch production workpieces.

The cleaning workpiece must be casting and heat-treated parts that are not afraid of collision. The machine can be used as a stand-alone machine or by wiring

The working principle of the crawler shot blasting machine:

Put the workpiece into the rubber crawler drum, the operator presses the "Run" button, the shot blasting chamber door is closed pneumatically, the shot blasting cleaning starts, the crawler moves forward, the workpiece continuously rolls, and the high-efficiency and powerful shot blasting device will shot blasting at high speed It is projected onto the surface of the tumbling workpiece, and the workpiece can be cleaned completely and evenly. The steel shot flows into the screw conveyor through the chute on the crawler, and then the steel shot is transported to the bucket elevator, and then lifted to the separator by the bucket elevator, where it is separated and stored for later use. After the shot blasting is finished, the shot blasting chamber door opens automatically, the crawler is reversed, and the workpiece is unloaded.

Main parameters of Q324 shot blasting machine

1. The diameter of the track end disc is 400mm

2. Speed ​​of crawler end disc 3.6r/mim

3. The maximum single piece weight of the cleaned workpiece is 5Kg

4. The maximum load capacity is 100Kg

5. Productivity 400-600Kg

6. Shot blasting machine: 1

7. Shot blasting amount 100Kg/min

8. Air volume of dust collector 2200m3/min

9. Total power 8KW

Machine description

A specified number of workpieces are added to the cleaning room. After the machine is started, the workpieces are driven by the roller and start to turn. At the same time, the beam formed by the projectile thrown by the shot blaster at high speed hits the surface of the workpiece evenly, so as to achieve the purpose of cleaning. The thrown projectiles and sand particles flow into the steel mesh at the bottom through the small holes on the rubber track, and are sent to the elevator through the screw conveyor, and the elevator is lifted to the separator for separation. The dust is sucked by the fan and sent to the dust collector for filtering. The cleaned air is discharged into the atmosphere. The dust on the filter cartridge is blown back by high pressure and falls into the dust box at the bottom of the dust collector. The user can remove it regularly; waste sand flows out from the waste pipe , The shot-sand mixture is recovered by the elevator and enters the separator, and then reused after the separator is separated. The clean shots enter the shot blaster through the shot supply gate to throw the workpiece.


Inquiry