Burr machineIt is used to process the burrs of compressed or injection molded thermosetting plastic products. Self-contained projection device, chassis, endless belt conveyor, dust collection device, etc. are combined into one. It is a kind of spray washing machine with simple appearance, no space, and high efficiency.
1. The projection material is projected on the product by the high-speed rotating impeller, and the flaky burrs and the burrs in the recesses or holes can be removed in a short time. The amount of projected power can be adjusted by the inverter keyboard on the control panel to an appropriate number of revolutions.
2. The spray washing room is composed of an endless belt conveyor, and rubber is laid all in the room. The input products are stirred in the forward rotation of the ring belt, and the effect of uniform removal of burrs is achieved by the impact of the projection material thrown out at high speed.
3. The projected projection material can be used continuously through a sophisticated circulation system. The powdery burrs and smaller projection materials are attracted and collected by the dust collector, while the larger burrs are filtered out by the screen.
4. In the middle of the suction pipe, there is a nozzle for humidification. A proper amount of moisture can further enhance the spray washing effect, prevent dust adhesion, and increase the life of the projected material.
The principle of the burr machine: It is to process the burr of the compressed or injection molded thermosetting plastic products. Self-contained projection device, chassis, endless belt conveyor, dust collection device, etc. are combined into one. It is a kind of spray washing machine with simple appearance, no space, and high efficiency.
Related Industry Knowledge
- Environmental protection and energy saving sandblasting machine controls dust pollution during the sandblasting process
- Wet blasting machine with abrasive blasting
- Automatic sandblasting machine automatically refers to automatic sandblasting
- Adjustable spray pressure of small sandblasting machine
- Inhalation type sandblasting
- Process parameters of sandblasting machine for composite metal materials
- Design of automatic sandblasting machine with synchronous conveying of shaft inner hole and outer circle
- Talking about the research and optimization status of rust removal and sandblasting process parameters
- Mobile sandblasting machine adopts press-in sandblasting
- Sandblasting machine manufacturers provide a variety of sandblasting machines
- The material used for the blasting of the rust removal sandblasting machine is the sandblasting abrasive
- Conveyor type automatic sandblasting machine adopts triangle belt to convey workpiece