Talking about the characteristics of water rust removal and sandblasting machine

Water rust removal sandblasting machineIt is an environmentally friendly equipment for rust removal, renovation and anti-corrosion of various outdoor materials. Its working principle is similar to that of a traditional dry sandblasting machine. It uses air compression as the driving force for the operation of the entire equipment, and then sprays the mixed liquid with water, river sand and other sand materials onto the products that need sandblasting through the spray gun. And can clean up the paint and rust spots on these products. The difference between the water rust removal sandblasting machine and the traditional dry sandblasting machine is that its medium is water and sand, which will greatly inhibit the dust generated during the sandblasting process and reduce the impact on the surrounding Environmental pollution, and it will not produce sparks during work, which is very suitable for spraying in some flammable and explosive places. The following describes the characteristics of the water rust removal sandblasting machine.

The water rust removal sandblasting machine has the following characteristics: 1. Small size and easy operation. The volume of this sandblasting machine is not large, and one person can carry out transportation, sandblasting and other operations on it. It is very convenient to use and is suitable for rust removal and corrosion protection in almost all places. 2. The water rust removal and sandblasting machine adopts air compression power, which can pneumatically control the equipment, linkage exhaust, pressure relief and other operations, so that the air pressure of the sandblasting tank is 0 when it is stopped, and the pressure does not exceed 0.8 when it is started. Mpa, this design not only reduces the potential safety hazards caused by pressurization during the operation of the sandblasting machine, but also ensures the sandblasting effect of the water rust removal sandblasting machine.

In addition, the water rust removal sandblasting machine also adopts the technology of shutting down and exhausting. When the sandblasting machine is stopped, the residual air pressure in the sandblasting tank can continue to press the abrasive into the sand pipe, and the sandblasting can be carried out directly when it is turned on again. , The mixing ratio of high-pressure air and abrasives in the sand pipe of the sandblasting machine is effectively controlled, so that there will be no pulse phenomenon when starting up, so that the sandblasting of the water rust removal sandblasting machine is more smooth.