Banner
Overview of anti-skid automatic sandblasting machine for automobiles
- 2020-05-04-

Overview of anti-skid automatic sandblasting machine for automobiles

Anti-skid for automobileAutomatic sandblasting machineThe tires can be blasted intermittently or continuously under severe driving conditions, effectively reducing possible wheel slip or car side slips, and avoiding or reducing accidental traffic accidents such as rollovers and crashes. At present, in the rainy and snowy days in winter or spring and autumn, when people drive cars in the wild, they will inevitably encounter low temperature after rain and snow.When the road surface is icy or semi-icy, the rolling resistance of the tire increases due to the decrease of the adhesion coefficient, causing the wheels to slip.The driver will not be able to drive at the predetermined speed, especially when encountering obstacles on slippery or wet roads, due to the driver’s instabilityTo determine the mood and the unstable state of the vehicle, sudden shifting or sudden braking, etc., traffic accidents such as rollovers and crashes often occur.The application of non-slip automatic sandblasting machine for automobiles can greatly reduce the occurrence of such accidents.

全自动喷砂机.png


The anti-skid automatic sand blasting machine for automobiles is mainly composed of the welding parts of the sand blasting machine base, the combined parts of the motor and the reducer, the sand blasting gate assembly, the sand conveying road welding parts and other parts. The assembly relationship of the main components is: the motor mounting seat is fixed with hexagon head bolts and connected to the welded parts of the sandblasting machine base; the compression spring guide shaft is installed on the welded parts of the sandblasting machine base with hexagonal nuts Install the gate assembly into the gate guide groove of the motor mounting seat first. Pay attention when assembling, insert the installed compression spring guide shaft into the hole on the upper plane of the gate assembly first, and adjust the compression The preload of the spring; the motor and reducer assembly parts of the automatic sandblasting machine are installed on the installed motor mount with hexagon bolts.

In addition, the welded parts of the sand conveying path of the automatic sandblasting machine are fixedly connected with the motor mounting seat with cross recessed pan head screws. First install the roller and crank on the roller mounting shaft, and then fasten the connection with a round nut. The crank and roller assembly is installed on the output shaft of the motor and reducer assembly. Then adjust the opening size of the gate of the automatic sandblasting machine and check the flexibility of each moving part.

17.png


Related News