The working principle of the automatic sandblasting machine system for the inner wall of the pipeline

Pipe wallAutomatic sandblasting machineIt is a special equipment for sandblasting the inner wall of the pipeline. Sandblasting machines of different diameters are used to blast the inner walls of the corresponding pipes. For the inner wall of the pipe with a relatively small diameter, the sandblasting machine mainly uses a high-speed air-abrasive mixed flow and sprays it on the cone-shaped nozzle of the pipe inner wall cleaner, so that the abrasive spreads in a conical shape, thereby impacting the pipe wall and cleaning the inner wall of the pipe. effect. Here is a brief introduction to the working principle of the automatic sandblasting machine for the inner wall of the pipeline.

The working principle of the automatic sand blasting machine system for the inner wall of the pipeline is: first open the sand blasting box door of the sand blasting machine, after raising the flip-in board, then put the six pipes on the flip-in board, and then turn the in-board board. Lower, at this time, the pipe will automatically rotate in the blasting box. After closing the gate of the sandblasting box of the automatic sandblasting machine, the sandblasting flatbed trolley will drive the spray gun to move in the pipeline, and perform sandblasting operations on the inner wall of the pipeline. The sandblasting flatbed trolley runs automatically. After reaching the bottom of the pipeline, it will automatically return to the starting point, and then stop the operation. After the sandblasting operation is completed, the turning rod of the sandblasting machine system will send the sandblasted pipe out of the sandblasting box, and the pipe will also enter the next treatment process.

The automatic sandblasting machine for the inner wall of the pipeline will produce some relatively fine dust when performing sandblasting. If the dust is not processed, it will be attached to the surface of the machine, thereby affecting the normal operation of the entire sandblasting operation. At the same time, these wind and dust will also pollute the surrounding environment and threaten the health of the personnel involved in sandblasting operations. Therefore, the automatic sandblasting machine for the inner wall of the pipeline is specially equipped with a dust removal device to process the dust generated by the sandblasting operation on the inner wall of the pipeline, so that it no longer poses a threat to the sandblasting operation, the surrounding environment and the health of personnel.