Characteristic description of water rust removal sandblasting machine
Water rust removal sandblasting machineIt is an environmentally friendly equipment for rust removal, renovation and anti-corrosion of various outdoor materials. Its working principle is similar to that of a traditional dry sandblasting machine. It uses air compression as the driving force for the operation of the entire equipment, and then sprays the mixed liquid with water, river sand and other sand materials onto the products that need sandblasting through the spray gun. And can clean up the paint and rust spots on these products. The difference between the water rust removal sandblasting machine and the traditional dry sandblasting machine is that its medium is water and sand, which will greatly inhibit the dust generated during the sandblasting process and reduce the impact on the surrounding Environmental pollution, and it will not produce sparks during work, which is very suitable for spraying in some flammable and explosive places. The following describes the characteristics of the water rust removal sandblasting machine.
The water rust removal sandblasting machine has the following characteristics: 1. Small size and easy operation. The volume of this sandblasting machine is not large, and one person can carry out transportation, sandblasting and other operations on it. It is very convenient to use and is suitable for rust removal and corrosion protection in almost all places. 2. The water rust-removing sandblasting machine adopts air compression power, which can pneumatically control the equipment, linkage exhaust, pressure relief and other operations, so that the air pressure of the sandblasting tank is 0 when it is stopped, and the pressure does not exceed 0.8 when it is started. Mpa, this design not only reduces the safety hazards caused by pressurization during the operation of the water rust removal sandblasting machine, but also ensures the sandblasting effect of the sandblasting machine.
In addition, the water rust removal sandblasting machine also adopts the technology of shutting down and exhausting. When the sandblasting machine is stopped, the residual air pressure in the sandblasting tank can continue to press the abrasive into the sand pipe, and the sandblasting can be carried out directly when it is turned on again. , The mixing ratio of high-pressure air and abrasives in the sand pipe of the sandblasting machine is effectively controlled, so that there will be no pulse phenomenon when starting up, so that the sandblasting of the water rust removal sandblasting machine is more smooth.
- Low energy consumption of small sandblasting machine
- Derusting and sandblasting machine uses compressed air as power
- Sandblasting machine manufacturers generally supply sandblasting machines
- The mobile sandblasting machine uses the power, flow rate and flow of compressed air
- The working principle of wet sandblasting machine uses sandblasting abrasive and liquid as the medium
- Environmental protection and energy saving sandblasting machine supporting requirements
- Conveyor automatic sandblasting machine adopts suction sandblasting
- The nozzle of the rotary automatic sandblasting machine adopts special high wear-resistant boron carbide material
- The composition of the pipe end thread mobile sandblasting machine
- With timing automatic sandblasting, inching positioning function
- Talking about the function and characteristics of wet sandblasting machine
- Function introduction of automatic sandblasting machine
- Talking about the composition of mobile sandblasting machine
- Dust removal status of automatic sandblasting machine
- Composition of mobile sandblasting machine
- Analysis of common design problems of mobile sandblasting machine
- What are the factors that cause the uneven sand density of the automatic sandblasting machine
- Points to note when buying a fully automatic sandblasting machine
- Analysis of problems existing in dry mobile sandblasting machine
- The problems faced by the rust removal sandblasting machine process