The working principle of the mobile sandblasting machine system on the inner wall of the pipeline
Pipe wallMobile sandblasting machineIt is a special equipment for sandblasting the inner wall of the pipeline. Sandblasting machines with different diameters are used to blast the inner walls of the corresponding pipes. For the inner walls of the pipes with relatively small diameters, the sandblasting machine mainly uses a high-speed air abrasive mixed flow, which is sprayed onto the conical nozzle of the pipe inner wall cleaner to make the abrasive It spreads in a conical shape, thereby impacting the pipe wall to achieve the effect of cleaning the inner wall of the pipe. The working principle of the mobile sandblasting machine on the inner wall of the pipeline is briefly introduced below.
The working principle of the mobile sandblasting machine system on the inner wall of the pipeline: first open the sandblasting box door of the sandblasting machine, after raising the flip-in board, then put the six pipes on the flip-in board, and then lower the in-turn board. At this time, the pipeline will automatically rotate in the blasting box. After closing the gate of the sandblasting box of the mobile sandblasting machine, the sandblasting flatbed trolley will drive the spray gun to move in the pipeline and perform sandblasting operations on the inner wall of the pipeline. The sandblasting flatbed trolley runs automatically. After the bottom of the pipe, it will automatically return to the starting point, and then stop the operation. After the sandblasting operation is completed, the turning rod of the mobile sandblasting machine system will send the sandblasted pipeline out of the sandblasting box, and the pipeline will also enter the next processing process.
The mobile sandblasting machine on the inner wall of the pipeline will produce some relatively fine dust when performing sandblasting operations. If the dust is not processed, it will be attached to the surface of the machine, thereby affecting the normal operation of the entire sandblasting operation. At the same time, these wind and dust will also pollute the surrounding environment and threaten the health of the personnel involved in sandblasting operations. Therefore, the mobile sandblasting machine for the inner wall of the pipeline is specially equipped with a dust removal device to process the dust generated by the sandblasting operation on the inner wall of the pipeline, so that it no longer poses a threat to the sandblasting operation, the surrounding environment, and the health of personnel.
- Low energy consumption of small sandblasting machine
- Derusting and sandblasting machine uses compressed air as power
- Sandblasting machine manufacturers generally supply sandblasting machines
- The mobile sandblasting machine uses the power, flow rate and flow of compressed air
- The working principle of wet sandblasting machine uses sandblasting abrasive and liquid as the medium
- Environmental protection and energy saving sandblasting machine supporting requirements
- Conveyor automatic sandblasting machine adopts suction sandblasting
- The nozzle of the rotary automatic sandblasting machine adopts special high wear-resistant boron carbide material
- The composition of the pipe end thread mobile sandblasting machine
- With timing automatic sandblasting, inching positioning function
- Characteristic description of water rust removal sandblasting machine
- Talking about the function and characteristics of wet sandblasting machine
- Function introduction of automatic sandblasting machine
- Talking about the composition of mobile sandblasting machine
- Dust removal status of automatic sandblasting machine
- Composition of mobile sandblasting machine
- Analysis of common design problems of mobile sandblasting machine
- What are the factors that cause the uneven sand density of the automatic sandblasting machine
- Points to note when buying a fully automatic sandblasting machine
- Analysis of problems existing in dry mobile sandblasting machine