arrow_top
Banner
Introduction to the main functions of the automatic sandblasting machine
- 2020-08-11-

Introduction to the main functions of the automatic sandblasting machine

Automatic sandblasting machineThe working principle is to use compressed air as power, so that the abrasive will form a high-speed mixed jet with the air during the jetting process, and then spray it to the surface of the workpiece to be processed through the spray gun, so that the outer surface of the workpiece is physically changed. Due to the impact and cutting effect of the high-speed mixing jet of the automatic sandblasting machine on the surface of the workpiece, the surface of the workpiece can show a completely different cleanliness and roughness from the past, and the mechanical properties of the workpiece can be greatly improved. Improve the fatigue resistance of the workpiece, but also increase the adhesion between it and the coating. The main functions of the automatic sandblasting machine are as follows:

全自动喷砂机.png

Through careful analysis, the main factors affecting the uneven sand density of the automatic sandblasting machine are as follows:

One is the unstable air pressure of the air compressor. When multiple spray guns of the automatic sandblasting machine work at the same time, the air compressor needs to supply compressed air power to the multiple spray guns at the same time, which will easily cause air pressure instability. The main performance is: when the air pressure is high, the automatic sandblasting machine will absorb more abrasives, so more abrasives will be naturally ejected; vice versa.

The second is that the distance between the spray gun and the surface of the workpiece is too far. When the automatic sandblasting machine performs sandblasting, the closer the workpiece is to the spray gun, the greater the impact it will receive, which will cause the abrasive to be relatively concentrated on the surface area of ​​the workpiece, and the sandblasting density is relatively dense; When the spray gun of the sandblasting machine is far away from the workpiece, the sandblasting area will become larger and the density will be thinner, which will cause uneven surface density of the workpiece.

The third is that the walking speed of the spray gun is unstable. The walking speed of the spray gun of the automatic sandblasting machine will affect the density of the workpiece surface. Since the number of sandblasting per unit time is fixed, when the spray gun travels at a slower speed, the surface of the workpiece exhibits a denser density, but the covered area will also be small; when the spray gun travels faster, it appears The effect is the opposite. Therefore, when the automatic sand blasting machine performs sand blasting operation, it must be noted that the walking speed of the spray gun is maintained at a uniform speed to avoid sudden speed and slow speed, which will cause uneven surface treatment of the workpiece.

自动喷砂机.png